1To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2Install this unit (RX-E410 and CDX-E410) in a well ventilated,
cool, dry, clean place with at least 10 cm on the top (except for
CDX-E410), 10 cm on the left and right, and 10 cm at the back of
this unit — away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold.
3Locate this unit away from other electrical appliances, motors, or
transformers to avoid humming sounds.
4Do not expose this unit to sudden temperature changes from cold
to hot, and do not locate this unit in an environment with high
humidity (i.e. a room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5Avoid installing this unit where foreign object may fall onto this
unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
–Other components, as they may cause damage and/or
discoloration on the surface of this unit.
–Burning objects (i.e. candles), as they may cause fire, damage
to this unit, and/or personal injury.
–Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to this
6Do not cover this unit with a newspaper, tablecloth, curtain, etc.
in order not to obstruct heat radiation. If the temperature inside
this unit rises, it may cause fire, damage to this unit, and/or
7Do not plug in this unit to a wall outlet until all connections are
8Do not operate this unit upside-down. It may overheat, possibly
9Do not use force on switches, knobs and/or cords.
10When disconnecting the power cable from the wall outlet, grasp
the plug; do not pull the cable.
11Do not clean this unit with chemical solvents; this might damage
the finish. Use a clean, dry cloth.
12Only voltage specified on this unit must be used. Using this unit
with a higher voltage than specified is dangerous and may cause
fire, damage to this unit, and/or personal injury. YAMAHA will
not be held responsible for any damage resulting from use of this
unit with a voltage other than specified.
13Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened for any reasons.
14When not planning to use this unit for long periods of time (i.e.
vacation), disconnect the AC power plug from the wall outlet.
15Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
16Before moving this unit, press STANDBY/ON to set this unit in
standby mode, and disconnect the AC power plug from the wall
17Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the outlet,
then leave the unit alone.
18When using the unit for a long time, the unit may become warm.
Turn the power off, then leave the unit alone for cooling.
19Install this unit near the wall outlet and where the AC power plug
can be reached easily.
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings to
look into inside.
■For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
■Special Instructions for U.K. Model
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit itself
is turned off. This state is called the standby mode. In this
state, this unit is designed to consume a very small quantity of
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
The laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
As the colours of the wires in the mains lead of this appa-
ratus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
Apakah Anda memiliki pertanyaan tentang PianoCraft E-410 Yamaha?
Jumlah pertanyaan: 0
Ajukan pertanyaan anda mengenai Yamaha PianoCraft E-410 di sini kepada pemilik produk lainnya. Sampaikan dekripsi yang jelas dan singkat tentang masalah dan pertanyaan anda. Semakin jelas penjelasan masalahnya, semakin mudah bagi pemilik Yamaha PianoCraft E-410 lainnya untuk menyediakan jawaban terbaik.
Tentang Yamaha PianoCraft E-410
Tampilkan panduan gratisYamaha PianoCraft E-410 di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Yamaha PianoCraft E-410 lainnya. Ajukan pertanyaan Anda di sini