Petunjuk PDX-B11 Yamaha

PDX-B11 Yamaha
(1)
  • nomor halaman: 2
  • Jenis berkas: PDF
Bluetooth
version .................................................................................................... Ver. 2.1+EDR
Supported profile .................................................................................................... A2DP
Supported audio codec ............................................................................................ SBC, AAC
RF output power .....................................................................................................
Bluetooth
Class 2
Maximum communications range ........................................................................... 10 m (33 ft) without interference
AUX Input connector .............................................................................................. ø 3.5 mm (1/8 in.) stereo mini jack
Power voltage/Frequency
U.S.A. and Canada models .................................................................................. AC 120 V, 60 Hz
Other models ........................................................................................................ AC 100–240 V, 50/60 Hz
Power consumption ................................................................................................. 8 W (speaker)
Power consumption when power off and
Bluetooth
disconnected ......................... 0.5 W or less
AC Adaptor
Australia model .................................................................................................... MU18-D120150-A3 (DC 12 V, 1.5 A)
U.K. model........................................................................................................... MU18-D120150-B2 (DC 12 V, 1.5 A)
Battery supply ......................................................................................................... LR6, AA, UM-3 × 6
Battery life .............................................................................................................. 8 hours of power at 0.18 W output (Alkaline Battery)
Weight ..................................................................................................................... 1.5 kg (3.3 lbs)
Dimensions
240 mm
210 mm
(8-1/4in.)
237 mm
(9-1/2in.)
(9-3/8in.)
* Specifications are subject to change without notice.
* The name plate is located on the bottom of the unit.
Bluetooth
Bluetooth
is a technology for wireless communication between devices within an area of about 10 meters (33 ft) employing the 2.4 GHz frequency band,
a band which can be used without a license.
Bluetooth
is a registered trademark of the
Bluetooth
SIG and is used by Yamaha in accordance with a license agreement.
Handling
Bluetooth
communications
•The 2.4 GHz band used by
Bluetooth
compatible devices is a radio band shared by many types of equipment.
While
Bluetooth
compatible devices use a technology minimizing the influence of other components using the same radio band, such influence may reduce
the speed or distance of communications and in some cases interrupt communications.
•The speed of signal transfer and the distance at which communication is possible differs according to the distance between the communicating devices, the
presence of obstacles, radio wave conditions and the type of equipment.
•Yamaha does not guarantee all wireless connections between this unit and devices compatible with
function.
2 En1 En 3 En

Controls and functions

Specifications

Installation
Install in a stable place, being careful of the following points:
•Do not place on top of steel or other metal plates.
•Do not cover with a cloth, etc.
•Install in the same room as the device with which signals are to be
exchanged (
Bluetooth
profile A2DP compatible portable music player,
mobile phone, etc.) within a direct, line-of-sight distance of 10 m (33 ft).
•Make sure there are no obstacles between this unit and the
Bluetooth
component.
Within 10 m (33 ft)
Power (Power on/off)
Press
(power) to turn this unit on.
The status indicator (Green) lights up when the unit is powered
on.
Auto power on
The unit powers on automatically when a connected
Bluetooth
device is played at a loud volume.
Auto power on is not available if the unit is powered by batteries.
Auto power off
The unit powers off automatically in the following cases:
-
When an external component is not connected
Bluetooth
connection is established but there has been no
playback for more than 30 minutes.
Bluetooth
is disconnected by operating the other
component.
-
When
Bluetooth
connection is not established
•The external component is not connected for more than 30
minutes.
•The external component’s cable is disconnected from the
unit.
Pairing (Registration)
Pairing must be performed when using
Bluetooth
connection for
the first time or if pairing data has been deleted.
What is pairing…?
Refer to the operation of registering mobile phones, etc., for
Bluetooth
communications (hereafter referred to as “other
components”). Follow the procedure described below to pair.
Paring procedure
1 Press
(power) to turn this unit on.
2 Turn on the power of the other component you
want to pair with.
3-a [For components with input keys (mobile phones,
computers, etc.)]
Operate the other component to detect
Bluetooth
components.
For details, refer to the other component’s operating instructions.
3-b [For components without input keys (
Bluetooth
adaptors, etc.)]
Set the other component to the pairing mode and then
proceed to step 6.
For details, refer to the other component’s operating instructions.
4 Select “PDX-B11 Yamaha” from the list of the other
component.
5 If you are prompted for input a passkey, input the
number
.
6 Check that pairing is completed.
•Check that the pairing process on the other component has been
completed. If the pairing process fails, start over from step 3.
•If the power supply to this unit is cut off during the pairing
operation, the pairing data may be damaged. If so, perform the
procedure described at “Clearing all the pairing data” and then
perform pairing again.
•This unit can be paired with up to 8 other components. When
pairing is conducted successfully with a 9th component and the
pairing data is registered, the pairing data for the least recently
used other component is cleared.
Bluetooth connection and playback
1 Press (power) to turn this unit on.
2 Operate the paired other component to establish
Bluetooth
connection.
The status indicator (Blue) stops blinking and stays on when
Bluetooth
connection is completed.
•You can omit this operation if the other component can be connected
automatically while pairing.
•The unit and the other component are connected automatically, if
the component is latest recently connected one. (Auto Connection)
Note
Auto Connection may not be available depending on
the other component. Operate other component if Auto
Connection is not available.
3 Start playback of the other component.
4 Adjust the volume level using
/ (volume).
Disconnect Bluetooth
a Press (
Bluetooth
) on the unit.
b Operate the other component to disconnect
Bluetooth
.
How to switch a connected
Bluetooth
component
1 Press
(
Bluetooth
) on the unit to be
disconnected.
(The unit enters Waiting Status.)
2 Establish
Bluetooth
connection.
(Perform pairing procedure if this is the first
Bluetooth
connection with the new component.)
Clearing all the pairing data
1 Press (power) to turn this unit on.
2 Press and hold
(
Bluetooth
) on the unit for more
than 10 seconds.
All the paring data on the unit is cleared.
Connecting an
external device
AUX
1 Connect a
(commercially
available) 3.5 mm (1/8
in.) stereo mini plug
cable to the AUX on
the rear panel.
2 Power on the unit.
3 Play back the AUX
source.
Multi-Source Mix
Audio will be mixed when
AUX source is played
while playing music via
Bluetooth
connection.

Bluetooth

connection for playing music

This unit enables you to enjoy music playback wirelessly with a
Bluetooth
component (such as a mobile phone, digital music player,
etc.) which is paired (registered) and has established
Bluetooth
connection with this unit.
Handle
Control panel
Power
on/off
Volume
+
Status indicator
(Blue)
Volume
Status indicator
(Green)
Press and hold (power) for more than 3
seconds to power off the unit and then enter
power-saving mode.
Bluetooth
connection is not available
while in power-saving mode. To perform
Bluetooth
connection, press (power) on
the unit to cancel power-saving mode.
Bluetooth
for switching
Bluetooth
components. (Default is Auto
Connection.
3 En)

Before use

Connect the included AC adaptor.
Replace the battery cover.
C
Follow the + and – markings on
PDX-B11 when inserting the batteries.
B
When operating PDX-B11 using batteries
A
To remove the battery cover, push the
tab while lifting the cover upward.
Use 6 commercially available AA batteries.
Supplied accessory
Please confirm that the
following accessory is
included before using the unit.
• AC adaptor
Connect the AC adaptor to
PDX-B11, before connecting the
power cable to the wall outlet.
When using PDX-B11 with batteries,
disconnect the AC adaptor from the rear
panel.
A
B
12V
---
Features
Simple, automatic connectionMulti-Source Mix (Bluetooth, AUX-in)Portable use and battery operationWireless music streaming via Bluetooth
Bluetooth Speaker System

Owner's manual

Printed in China ZE06490
PDX-B11 Yamaha

Apakah Anda memiliki pertanyaan tentang PDX-B11 Yamaha?

Jumlah pertanyaan: 0

Ajukan pertanyaan anda mengenai Yamaha PDX-B11 di sini kepada pemilik produk lainnya. Sampaikan dekripsi yang jelas dan singkat tentang masalah dan pertanyaan anda. Semakin jelas penjelasan masalahnya, semakin mudah bagi pemilik Yamaha PDX-B11 lainnya untuk menyediakan jawaban terbaik.

Tampilkan panduan gratisYamaha PDX-B11 di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Yamaha PDX-B11 lainnya. Ajukan pertanyaan Anda di sini

spesifikasi produk

Umum
Brand Yamaha
Model PDX-B11
Produk Cradle / docking station
EAN 4957812524919, 4957812525008, 4957812525091, 4957812525183, 4957812525190
Bahasa Inggris
Jenis berkas PDF
Pengeras suara
Saluran keluar audio 1.0 saluran
Jumlah pengeras suara 1
Jumlah driver 3
Tweeter/pengeras suara frekuensi tinggi Ya
Diameter tweeter 35 mm
Jenis pengeras suara 2 cara
Performa
Penggunaan yang direkomendasikan Universal
Amplifier Tidak
Audio
Tingkat daya RMS - W
Rentang frekuensi - Hz
Impedansi - Ω
Desain
Warna produk Jeruk
Jenis produk Pengeras suara porabel mono
Port & antarmuka
Jarak bluetooth 10 m
Teknologi konektivitas Nirkabel
Saluran AUX masuk Ya
Listrik (AC) masuk Ya
Profil bluetooth A2DP
Bluetooth Ya
Daya
Tipe sumber daya AC,Battery
Jenis baterai AA
Jumlah baterai yang didukung 6
Daya tahan baterai (maks) 8 j
Teknologi baterai Alkali
Berat dan dimensi
Panjang 210 mm
Lebar 240 mm
Tinggi 237 mm
Berat 1500 g
Tampilkan lebih banyak

Pertanyaan yang Sering Ditanyakan

Di bawah ini, Anda akan menemukan pertanyaan yang paling sering ditanyakan mengenai Yamaha PDX-B11 .

Apakah pertanyaan Anda tidak terdaftar? Ajukan pertanyaan Anda di sini