Petunjuk V-1016 Valcom

V-1016 Valcom
  • nomor halaman: 3
  • Jenis berkas: PDF
Issue 8
1 947038





This instruction provides identification, installation
and technical assistance information for the V-1038
Horn/Amplifier Assembly.
This paging unit has received a FCC type KX
registration and is designed to be used with FCC
registered key telephone systems. In accordance with
FCC rules with applicable tariffs, this Paging Unit may
only be installed with the authorization of the host
system. Installations may be made by Valcom, Inc.,
an authorized agent of the same, equipment
manufacturers, telephone companies, registered
telephone refurbishers and those qualified for
installation of FCC registered systems under FCC
Rules Section 68.215. The FCC Registration Number,
BAF9I7-69358-KX-N, will be listed in the affidavits
filed with the Telephone Company; it will also be
recorded in the system log kept by installation and
maintenance personnel.


The V-1038 Paging Horn/Amplifier Assembly is a
self-contained 30 Watt paging system incorporating:
(a) 30 Watt amplifier
(b) Volume control
(c) High efficiency horn
7.38" H x 10.00" W x 10.40" D
(18.75cm H x 25.40cm W x 26.42cm D)
4.1 lbs. (1.86kg)
Nominal Specifications:
Input impedance: 600 Ohms minimum
Input level: 10dBm nominal
Current at -48VDC: 1 Amp
Green Tip Audio Source
Red Ring Audio Source
White -48VDC Power
Black Ground Power
Due to the low-level signal required, distribution
wiring is normally accomplished through house cable
pair or station wire.
Typical applications include:
(a) Use with a Valcom page control.
(b) Expanding the capability of telephone
system’s which contain limited paging
(c) Loud ringer application in systems where
loud speaker tone signaling is employed.


This horn may be used for either interior or exterior
paging applications and should be installed 16 to 40
feet from the floor taking into account installation and
maintenance access.
Connect station wire (or other suitable pairs) to the
proper speaker connection. When using station wire,
limit the maximum run to 250 feet. Two horns may be
connected to the same pairs if the total run is less
than 125 feet.
When a remote power unit is used, the audio pair run
should be limited to 5000 feet and a maximum of 6
V-1016 Valcom

Apakah Anda memiliki pertanyaan tentang V-1016 Valcom?

Jumlah pertanyaan: 0

Ajukan pertanyaan anda mengenai Valcom V-1016 di sini kepada pemilik produk lainnya. Sampaikan dekripsi yang jelas dan singkat tentang masalah dan pertanyaan anda. Semakin jelas penjelasan masalahnya, semakin mudah bagi pemilik Valcom V-1016 lainnya untuk menyediakan jawaban terbaik.

Tampilkan panduan gratisValcom V-1016 di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Valcom V-1016 lainnya. Ajukan pertanyaan Anda di sini

spesifikasi produk

Brand Valcom
Model V-1016
Produk Pengeras suara
Bahasa Inggris
Jenis berkas PDF
Pengeras suara
Saluran keluar audio 1.0 saluran
Penempatan pengeras suara Dapat dipasang pada dinding
Jumlah driver 1
Tweeter/pengeras suara frekuensi tinggi -
Woofer -
Diameter driver subwoofer (imperial) 8 "
Diameter driver 203.2 mm
Jenis pengeras suara 1-cara
Penggunaan yang direkomendasikan Lain
Warna produk Hitam
Bahan Kerangka Mesin -
Amplifier Internal
Tingkat daya RMS - W
Rentang frekuensi 80 - 10000 Hz
Impedansi 600 Ω
Sensitivitas 96 dB
Rasio sinyal terhadap kebisingan (SNR) -70 dB
Fitur lainnya
Equalizer Tidak
Jumlah produk yang disertakan 1 buah
Port & antarmuka
Teknologi konektivitas Berkabel
Berat dan dimensi
Panjang 292.1 mm
Lebar 106.7 mm
Tinggi 243.8 mm
Berat 2040 g
Tegangan masukan DC 24 V
Operational conditions
Suhu pengoperasian (T-T) -20 - 55 °C
Rentang kelembapan pengoperasian (H-H) 0 - 95 persen
Tampilkan lebih banyak

Pertanyaan yang Sering Ditanyakan

Di bawah ini, Anda akan menemukan pertanyaan yang paling sering ditanyakan mengenai Valcom V-1016 .

Apakah pertanyaan Anda tidak terdaftar? Ajukan pertanyaan Anda di sini