Petunjuk V-1001 Valcom

V-1001 Valcom
(1)
  • nomor halaman: 3
  • Jenis berkas: PDF
Issue 0

1 947062

V-1001

P-TEC SURFACE MOUNT

AMPLIFIED CEILING SPEAKER

INTRODUCTION

The V-1001 is a surface mounted speaker that
is self-amplified and is capable of reproducing
voice paging as well as background music. The
V-1001 has an externally accessible volume
control that can be adjusted by a screwdriver
through the side hole on the housing. All
speakers require -24VDC, 50mA. The baffle is
designed for mounting on acoustic tile, such as
those normally found in suspended-ceilings and
can be mounted without cutting large holes in
the tile. The mounting pins can be removed for
mounting in a hard ceiling. The speaker
housing has screw holes for securing speaker
without mounting pins. Although the P-TEC
speakers are designed specifically for standard
suspended ceilings, they can be used on many
types of ceiling materials. Two pair category
3/5/5E/6 UTP cable recommended.

INSTALLATION (see Figure 1)

1. Lift the adjacent ceiling tile and slide it out of
the way.
2. Pierce hole in tile where speaker is to be
mounted with a screwdriver. Feed wire
through hole to connect to speaker.
3. Make connections to amplifier (see Figure
2).
4. Install the speaker by inserting the mounting
pins through the ceiling tile and hold the
speaker in place.
5. Place the speaker mounting clips over
mounting pins (so pins slide through clips).
6. If necessary, adjust paging volume after
installation. The volume control is located
on the side of the speaker. Use a small
screwdriver to turn the control.
7. Install the volume control cover found in the
accessory pack.
V-1001 Valcom

Apakah Anda memiliki pertanyaan tentang V-1001 Valcom?

Jumlah pertanyaan: 0

Ajukan pertanyaan anda mengenai Valcom V-1001 di sini kepada pemilik produk lainnya. Sampaikan dekripsi yang jelas dan singkat tentang masalah dan pertanyaan anda. Semakin jelas penjelasan masalahnya, semakin mudah bagi pemilik Valcom V-1001 lainnya untuk menyediakan jawaban terbaik.

Tampilkan panduan gratisValcom V-1001 di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Valcom V-1001 lainnya. Ajukan pertanyaan Anda di sini

spesifikasi produk

Umum
Brand Valcom
Model V-1001
Produk Pengeras suara
EAN 799111009681
Bahasa Inggris
Jenis berkas PDF
Pengeras suara
Saluran keluar audio 1.0 saluran
Penempatan pengeras suara Langit-langit dapat didaki
Jumlah driver 1
Tweeter/pengeras suara frekuensi tinggi -
Woofer -
Diameter driver subwoofer (imperial) 8 "
Diameter driver 203.2 mm
Jenis pengeras suara 1-cara
Performa
Penggunaan yang direkomendasikan Lain
Warna produk Putih
Bahan Kerangka Mesin -
Amplifier
Amplifier Internal
Audio
Tingkat daya RMS - W
Rentang frekuensi - Hz
Fitur lainnya
Equalizer Tidak
Jumlah produk yang disertakan 1 buah
Port & antarmuka
Teknologi konektivitas Berkabel
Berat dan dimensi
Lebar 63.5 mm
Diameter 203.2 mm
Berat 560 g
Tampilkan lebih banyak

Pertanyaan yang Sering Ditanyakan

Di bawah ini, Anda akan menemukan pertanyaan yang paling sering ditanyakan mengenai Valcom V-1001 .

Apakah pertanyaan Anda tidak terdaftar? Ajukan pertanyaan Anda di sini