Name: Sealey TC962
Brand: Sealey
SKU: 1064166
Rating: 78 (1 reviews)

petunjukSealey TC962

INSTRUCTIONS FOR:

WORKSHOP TYRE CHANGERS

MODEL No's: TC961, TC962

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1.2 GENERAL SAFETY

 WARNING! Ensure Health & Safety, local authority, and general

workshop practice regulations are adhered to when using this

equipment. Under Health and Safety Law, Employers and Self

Employed Personnel have a legal duty to ensure Safe Working

Conditions for all employees and personel that may come into

contact with this equipment. In particular they must carry out a

specific risk and hazard assessment in the workplace to eliminate

or reduce any risk found and must record, update and retain

records of the results of this inspection.

 Familiarise yourself with the applications, limitations and any

possible or potential hazards of the tyre changer.

 Maintain the tyre changer in good condition (use an authorised

service agent).

 Replace or repair damaged parts. Use genuine parts only.

Unauthorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check regularly for damaged parts. Any part that is

damaged must be repaired or replaced before the equipment is

next used.

 Locate the tyre changer in a suitable work area, keep area clean and

tidy and free from unrelated materials. Ensure that there is adequate

lighting.

 WARNING! Use on a level surface, preferably concrete, to

which the tyre changer must be bolted.

 Keep the tyre changer clean for best and safest performance.

 Wear approved safety eye protection (standard spectacles are not

adequate).

 Keep hands and feet well clear of the bead breaker.

 Maintain correct balance and footing. Ensure the floor is not

slippery and wear non-slip safety shoes.

 Remove ill fitting clothing. Remove ties, watches, rings, and other

loose jewellery and contain and/or tie back long hair.

 Keep children and unauthorised persons away from the work area.

 DO NOT use the tyre changer for any purpose other than that for

which it is designed.

 DO NOT operate the tyre changer if any parts are damaged or

missing as this may cause failure and/or personal injury.

 DO NOT allow untrained persons to operate the tyre changer.

 DO NOT stand on the tyre changer.

 DO NOT operate the tyre changer when you are tired or under the

influence of alcohol, drugs or intoxicating medication.

MODEL TC962 ONLY

 WARNING! Ensure correct air pressure is maintained and not

exceeded. Recommended maximum pressure 150psi (10.3 bar).

 WARNING!Disconnect the tyre changer from the air supply before

changing accessories, servicing or performing any maintenance.

 Keep air hose away from heat, oil and sharp edges. Check air

hose for wear before each use, and ensure that all connections

are secure.

 DO NOT yank the hose from the air supply.

 DO NOT direct air from the air hose at yourself or others.

 When not in use ensure the air supply is turned off.

2. AIR SUPPLY - TC962 ONLY

TC961 TC962

Max. Safe Working Pressure. . . . . . . . . . . . N/A. . . . . . . . . . . . .150psi

Min. Wheel Diameter ...............203mm. . . . . . . . . . . . 203mm

Max. Wheel Diameter . . . . . . . . . . . . . . 460mm. . . . . . . . . . . . 460mm

Min. Wheel Depth . . . . . . . . . . . . . . . . . . 40mm. . . . . . . . . . . . . 40mm

Max. Wheel Depth .................203mm. . . . . . . . . . . . 304mm

Working Height . . . . . . . . . . . . . . . . . . . 640mm. . . . . . . . . . . . 815mm

3. SPECIFICATIONS

2.1. Ensure the air valve is in the "off" position before connecting to

the air supply.

2.2. You will require an air pressure between 100 and 150psi.

2.3.  WARNING! Ensure that the air supply is clean and does not

exceed 150psi. Too high an air pressure and/or unclean air will

cause excessive wear and may cause damage and/or

personal injury.

2.4. Drain the air tank daily. Water in the air line will damage the

tyre changer.

2.5. Clean the compressor air inlet filter screen weekly. The

recommended hook-up is shown below.

2.6. Line pressure should be increased to compensate for

unusually long air hoses (over 8 metres). The minimum hose

diameter should be 10mm I.D. and fittings must have the same

inside dimensions.

2.7. Keep hose away from heat, oil and sharp edges. Check hoses

for wear and make certain that all connections are secure.

TC961

TC962

Original Language Version

TC961, TC962 Issue: 2 - 20/10/09

Tampilkan panduan gratisSealey TC962 di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Sealey TC962 lainnya. Ajukan pertanyaan Anda di sini

Apakah Anda memiliki pertanyaan tentang TC962 Sealey?

Apakah Anda memiliki pertanyaan tentang Sealey dan jawabannya tidak ada di manual? Ajukan pertanyaan Anda di sini. Berikan deskripsi yang jelas dan komprehensif tentang masalah dan pertanyaan Anda. Makin jelas masalah dan pertanyaan Anda, makin mudah bagi pemilik Sealey lainnya untuk menyediakan jawaban yang terbaik.

Jumlah pertanyaan: 0

Umum

	Sealey
	TC962
	tidak ada dalam kategori
	Inggris
	Panduan pengguna (PDF)

Tidak dapat menemukan jawaban atas pertanyaan Anda di manual? Anda dapat menemukan jawaban atas pertanyaan Anda di FAQ tentang Sealey TC962 di bawah ini.

Apakah pertanyaan Anda tidak terdaftar? Ajukan pertanyaan Anda di sini

Tidak ada hasil