UN19F4000AF Samsung

Petunjuk UN19F4000AF Samsung

(1)
  • Connections
    y For the best picture and audio quality, connect digital devices using
    an HDMI cable.
    y If you connect an external device to the TV that uses an older version
    of HDMI, the video and audio may not work. If this occurs, ask the
    manufacturer of the device about the HDMI version and, if it is out of
    date, request an upgrade.
    y Be sure to purchase a certified HDMI cable. Otherwise, the picture
    may not display or a connection error may occur.
    y PC/DVI AUDIO IN input is not supported.
    y For an HDMI to DVI cable connection, you must use the HDMI IN
    2 (DVI) port.
    y Connecting through the HDMI cable may not be supported
    depending on the PC.
    y If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port,
    the audio does not work.
    y For Set-top box connection using HDMI cable, we highly
    recommend you to connect the HDMI IN 1 (STB) port.
    Getting Started
    Accessories
    Input Cables (Sold Separately)
    y Audio
    y Composite (AV)
    y Component
    y Coaxial (RF)
    y HDMI
    y HDMI-DVI
    Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.
    Cable Plugs Ports/Jacks Do not plug in opposite or wrong direction. It could
    damage the TV port.
    HDMI
    USB
    Do not plug cables in upside down. Be sure to check the orientation
    of the plug before plugging it in.
    TV Controller (Panel Key)
    The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.
    Remote control sensor
    TV Controller
    The image is drawn by facing
    the front side of the TV.
    Function menu
    m R s
    P
    Return
    Selecting the Media Play
    Selecting a Source
    Power Off
    Selecting the Menu
    Exits the menu when pressing the controller more than 1 second.
    When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first,
    you cannot operate it to move the up/down/left/right directions.
    Plug & Play (Initial Setup)
    When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Press
    the POWER button. Plug & Play is available only when the Input source is set to TV. Set the initial setup following instructions that the TV guides.
    Connecting the power cord and antenna. (refer to ‘Connections’)
    Remote Control
    This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
    Channel Menu
    Seeing Channels
    Channel List
    Add, delete or set Favorite channels and use the program guide for
    digital broadcasts. Select a channel in the All Channels, Added
    Channels, Favorite or Programmed screen by pressing the ▲/▼
    buttons, and pressing the ENTER
    E
    button. Then you can watch the
    selected channel.
    All Channels: Shows all currently available channels.
    Added Channels: Shows all added channels.
    *
    Favorite: Shows all favorite channels.
    Programmed: Shows all currently reserved programs.
    Using the remote control buttons with the Channel List
    x Green (Zoom): Enlarges or shrinks a channel number.
    x Yellow (Select): Selects multiple channel lists. Select desired
    channels and press the Yellow button to set all the selected
    channels at the same time. The
    c
    mark appears to the left of
    the selected channels.
    x
    T
    (Tools): Displays the Channel List option menu. (The Options
    menus may differ depending on the situation.)
    Channel Status Display icons
    y
    c
    : A channel selected.
    y
    *
    : A channel set as a Favorite.
    y
    )
    : A reserved program.
    y
    (
    : A program currently being broadcast.
    Memorizing channels
    Antenna (Switch to Cable / Switch to Air
    t
    )
    Before your television can begin memorizing the available channels, you
    must specify the type of signal source that is connected to the TV (i.e.
    an Air or a Cable system).
    Auto Program
    When selecting the Cable TV system: Selects the cable system.
    STD, HRC and IRC identify various types of cable TV systems.
    Contact your local cable company to identify the type of cable
    system that exists in your particular area. At this point, the signal
    source has been selected.
    After all the available channels are stored, it starts to remove
    scrambled channels. The Auto Program menu then reappears.
    Press the ENTER
    E
    button to stop the channel store during Auto
    Program.
    How to Stop Auto Programming
    1. Press the ENTER
    E
    button.
    2. A message will ask Stop Auto Program?. Select Yes by pressing
    the or button.
    3. Press the ENTER
    E
    button.
    Other Features
    Clear Scrambled Channel
    This function filters out scrambled channels after Auto Program is
    completed. This process may take up to 20~30 minutes.
    Press the ENTER
    E
    button to stop the Clear Scrambled
    Channel.
    This function is only available in Cable mode.
    Channel List
    Channel List Option Menu
    O Channel List
    t
    Set each channel using the Channel List menu options. Option menu
    items may differ depending on the channel status.
    Add / Delete: Delete or add a channel to display the channels you
    want.
    All deleted channels will be shown on the All Channels menu.
    A gray-colored channel indicates the channel has been deleted.
    The Add menu only appears for deleted channels.
    Delete a channel from the Added Channels or Favorite menu in
    the same manner.
    Add to Favorite / Delete from Favorite
    t
    : Set channels you
    watch frequently as Favorites.
    Timer Viewing: You can set a desired channel to be displayed
    automatically at the set time; even when you are watching another
    channel. Set the current time first to use this function.
    Only memorized channels can be reserved.
    Reserved programs will be displayed in the Programmed menu.
    When a digital channel is selected, press the (Next Program)
    button to view the digital program. If you select the ENTER
    E
    (Schedule) button on the next program, you can set Timer
    Viewing directly.
    Channel Name Edit: (analog channels only) Assign your own
    channel name.
    Select All: Select all the channels in the channel list.
    Deselect All: Deselect all the selected channels.
    You can only select Deselect All when one or more channels
    are selected.
    Auto Program: Scans for a channel automatically and stores in the
    T V.
    Programmed
    (in Channel List)
    O Channel List Programmed
    t
    You can view, modify or delete a show you have reserved to watch.
    Change Info: Change a show you have reserved to watch.
    Cancel Schedules: Cancel a show you have reserved to watch.
    Information: Display a show you have reserved to watch. (You can
    also change the reservation Information.)
    Select All / Deselect All: You can select or deselect all channels in
    the channel list.
    Channel Mode
    Change the channel mode directly between Added Channels and
    Favorite Channels.
    The Favorite Channels is enabled only when you set Add to
    Favorite.
    Fine Tune
    (analog channels only)
    If the reception is clear, you do not have to fine tune the channel, as
    this is done automatically during the search and store operation. If the
    signal is weak or distorted, fine tune the channel manually.
    Fine tuned channels that have been saved are marked with an
    asterisk “*” on the right-hand side of the channel number in the
    channel banner.
    To reset the fine-tuning, select Reset.
    Picture Menu
    Mode
    t
    Select your preferred picture type.
    When connecting a PC, you can only select Entertain and
    Standard.
    Dynamic: Suitable for a bright room.
    Standard: Suitable for a normal environment.
    Movie: Suitable for watching movies in a dark room.
    Entertain: Suitable for watching movies and games.
    Only available when connecting a PC.
    Samsung MagicAngle for 19", 22" models
    Adjust screen viewing Angle to optimize screen quality according to your
    viewing position.
    Samsung MagicAngle: When viewing the screen at an angle from
    below or above by setting the appropriate mode for each position you
    can obtain a similar picture quality as viewing the screen directly from
    the front.
    Off: Select when viewing from the front position.
    Lean Back Mode: Select when viewing from a slightly lower position.
    Standing Mode: Select when viewing from the upper position.
    Mode: Adjust screen viewing angle.
    When Samsung MagicAngle is set to Lean Back Mode or
    Standing Mode, Gamma is not available.
    Backlight / Contrast / Brightness / Sharpness /
    Color / Tint (G/R)
    Your television has several setting options for picture quality control.
    When connecting a PC, you can only make changes to Backlight,
    Contrast, Brightness and Sharpness.
    Advanced Settings
    (available in Standard / Movie mode)
    Compared to previous models, new Samsung TVs have a more precise
    picture.
    When connecting a PC, you can only make changes to Gamma and
    White Balance.
    Dynamic Contrast: Adjusts the screen contrast.
    Black Tone: Selects the black level to adjust the screen depth.
    Flesh Tone: Emphasize pink “flesh tone”.
    Color Space: Adjusts the range of colors available to create the
    image.
    White Balance: Adjusts the color temperature for a more natural
    picture.
    R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, blue)
    darkness.
    R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)
    brightness.
    Reset: Resets the White Balance to it’s default settings.
    Gamma: Adjusts the primary color intensity.
    Motion Lighting: Reduce power consumption by brightness control
    adapted motion.
    Available in Standard mode only.
    Picture Options
    When connecting a PC, you can only make changes to the Color
    Tone, Size, and HDMI Black Level.
    Color Tone
    Warm1 or Warm2 will be deactivated when the picture mode is
    Dynamic.
    Size: Your cable box/satellite receiver may have its own set of screen
    sizes as well. However, we highly recommend you use 16:9 mode
    most of the time.
    16:9: Sets the picture to 16:9 wide mode.
    Zoom1: Use for moderate magnification.
    Zoom2: Use for a stronger magnification.
    Wide Fit: Enlarges the aspect ratio of the picture to fit the entire
    screen.
    4:3: Sets the picture to basic (4:3) mode.
    Do not watch in 4:3 format for a long time. Traces of borders
    displayed on the left, right and center of the screen may cause
    image retention (screen burn) which are not covered by the
    warranty.
    Screen Fit: (DTV) Displays the full image without any cut-off when
    HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals
    are inputted.
    HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p
    (1280x720)
    Settings can be adjusted and stored for each external device you
    have connected to an input on the TV.
    Picture Sizes available by Input Source:
    Input Source Picture Size
    ATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
    DTV(1080i, 1080p), Component
    (1080i, 1080p), HDMI (720p, 1080i,
    1080p)
    16:9, Wide Fit, 4:3, Screen Fit
    Digital Clean View: If the broadcast signal received by your TV is
    weak, you can activate the Digital Clean View feature to reduce any
    static and ghosting that may appear on the screen.
    When the signal is weak, try other options until the best picture
    is displayed.
    MPEG Noise Filter: Reduces MPEG noise to provide improved
    picture quality.
    HDMI Black Level: Selects the black level on the screen to adjust the
    screen depth.
    Available only in HDMI mode (RGB signals).
    Film Mode: Sets the TV to automatically sense and process film
    signals from all sources and adjusts the picture for optimum quality.
    Available in ATV, DTV(interlace), AV, COMPONENT (480i / 1080i)
    and HDMI (480i / 1080i).
    LED Clear Motion: Removes drag from fast scenes with a lot of
    movement to provide a clear picture.
    Picture Reset
    Resets your current picture mode to its default settings.
    Reset Picture Mode: Returns all picture values in the currently
    selected mode to the default settings.
    Sound Menu
    Mode
    t
    Standard: Selects the normal sound mode.
    Music: Emphasizes music over voices.
    Movie: Provides the best sound for movies.
    Clear Voice: Emphasizes voices over other sounds.
    Amplify: Increase the intensity of high-frequency sounds to allow a
    better listening experience for the hearing impaired.
    Equalizer
    (standard sound mode only)
    Balance L/R: Adjusts the balance between the right and left speaker.
    100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):
    Adjusts the level of specific bandwidth frequencies.
    Reset: Resets the equalizer to its default settings.
    DTS TruSurround
    (standard sound mode only)
    DTS TruSurround is a patented DTS technology that solves the problem
    of playing 5.1 multichannel content over two speakers. TruSurround
    delivers a compelling, virtual surround sound experience through any
    two-speaker playback system, including internal television speakers. It is
    fully compatible with all multichannel formats.
    Preferred Language
    (digital channels only)
    Digital-TV broadcasts are capable of simultaneous transmission of many
    audio tracks (for example, simultaneous translations of the program into
    foreign languages).
    You can only select a language from among the ones being
    broadcasted.
    Multi-Track Sound
    (analog channels only)
    Mono: Choose for channels that are broadcasting in mono or if you
    are having difficulty receiving a stereo signal.
    Stereo: Choose for channels that are broadcasting in stereo.
    SAP: Choose to listen to the Separate Audio Program, which is
    usually a foreign-language translation.
    Depending on the program being broadcast, you can listen to
    Mono, Stereo or SAP.
    Auto Volume
    Because each broadcasting station has its own signal conditions, the
    volume may fluctuate each time channel is changed. This feature lets
    you automatically adjust the volume of the desired channel by lowering
    the sound output when the modulation signal is high or by raising the
    sound output when the modulation signal is low.
    Speaker Select
    If you are listening to the sound track of a broadcast or movie through an
    external receiver, you may hear a sound echo caused by the difference in
    decoding speed between the TV’s speakers and the speakers attached
    to your audio receiver. If this occurs, set the TV to External Speaker.
    When you set Speaker Select to External Speaker, the TV’s
    speakers are turned off. You will hear sound through the external
    speakers only. When you set Speaker Select to TV Speaker
    both the TV’s speakers and the external speakers are on. You will
    hear sound through both.
    When Speaker Select is set to External Speaker, the VOLUME
    and MUTE buttons will not operate and the sound settings will
    be limited.
    If there is no video signal, both the TV’s speakers and the external
    speakers will be mute.
    Visual Impaired
    (digital channels only)
    Adds verbal description to the main audio to help the visually impaired.
    Sound Reset
    Reset All: Resets all sound settings to the factory defaults.
    Setup Menu
    Language
    Set the menu language.
    Choose between English, Español, and Français.
    Setting the Time
    Time
    The current time will appear every time you press the INFO button.
    Clock: Setting the clock is for using various timer features of the TV.
    If you disconnect the power cord, you have to set the clock again.
    Clock Mode: Set the current time manually or automatically.
    Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
    Available only when Clock Mode is set to Manual.
    Time Zone: Select your time zone.
    DST: (Daylight Saving Time) Switches the DST (Daylight Saving Time)
    function on or off.
    DST and Time Zone function is only available when the Clock
    Mode is set to Auto.
    Sleep Timer
    t
    Automatically shuts off the TV after a preset period of time. (30, 60,
    90, 120, 150 and 180 minutes).
    To cancel the Sleep Timer, select Off.
    Timer 1 / Timer 2 / Timer 3
    Three different on / off timer settings can be made. You must set the
    clock first.
    On Time / Off Time: Set the hour, minute, am/pm and Activate /
    Inactivate. (To activate the timer with the setting you have chosen, set
    to Activate.)
    Volume: Set the desired volume level.
    Contents: When the On Time is activated, you can turn on a specific
    channel or play back contents such as photo or audio files.
    TV/USB: Select TV or USB. (Make sure that an USB device is
    connected to your TV.)
    Antenna: Displays the current antenna source.
    Channel: Select the desired channel.
    Music/Photo: Select the folder containing MP3/JPEG files on the
    USB device.
    The maximum displayed number of files, including sub folders, in
    one folder of USB storage device is 2000.
    The media may not be playing smoothly when using the device
    lower than USB 2.0.
    Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
    Manual to set at you convenience. If you select Manual, you can set
    up the day you want to activate the timer.
    Other Features
    Game Mode
    When connecting to a game console such as PlayStation™ or Xbox™,
    you can enjoy a more realistic gaming experience by selecting the game
    menu.
    Precautions and limitations for game mode
    x To disconnect the game console and connect another external
    device, set Game Mode to Off in the setup menu.
    x If you display the TV menu in Game Mode, the screen shakes
    slightly.
    x Game Mode is not available when the input source is set to TV.
    x After connecting the game console, set Game Mode to On.
    Unfortunately, you may notice reduced picture quality.
    LED TV
    user manual
    © 2013 Samsung Electronics Co., Ltd. All rights reserved.
    y
    The position of the port may differ
    depending on the model.
    HDMI OUT
    AUDIO OUT
    R-AUDIO-L
    COMPONENT OUT
    PR PB Y
    DVI OUT
    ANT OUT
    W R BR
    R W R B RG
    R
    G
    AUDIO OUT
    R-AUDIO-L
    VIDEO OUT
    Y
    R
    Y
    WR
    R W
    or
    Power Input
    (for 19", 22" models)
    TV Rear Panel
    TV Side Panel
    VHF/UHF Antenna
    Cable
    USB
    Component connection
    Headphones connection
    PC connection
    (Using an HDMI (to DVI) Cable)
    HDMI connection
    Set-top box / Blu-ray player / DVD
    AV connection
    VCR / Blu-ray player
    Blu-ray player / DVD
    Changing the Input Source
    Source List
    Use to select TV or an external input source such as a DVD player / Blu-
    ray player / cable box / STB satellite receiver.
    1. Press the SOURCE button.
    2. Select a desired external input source.
    TV / AV / Component / HDMI1 / HDMI2/DVI
    You can only choose external devices that are connected to the TV.
    In the Source List, connected inputs will be highlighted.
    How to use Edit Name
    Edit Name lets you associate a device name to an input source. To
    access Edit Name, press the TOOLS button in Source List. Name the
    device connected to the input jacks to make your input source selection
    easier.
    When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable,
    you should set the TV to PC mode under Edit Name.
    When connecting a PC to the HDMI IN 2(DVI) port with HDMI
    to DVI cable, you should set the TV to DVI PC mode under Edit
    Name.
    When connecting an AV devices to the HDMI IN 2(DVI) port with
    HDMI to DVI cable, you should set the TV to DVI mode under Edit
    Name.
    Information
    You can see detailed information about the connected external device.
    Display Modes (HDMI/DVI Input)
    4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz
    Mode Resolution
    Horizontal
    Frequency
    (KHz)
    Vertical
    Frequency
    (Hz)
    Pixel Clock
    Frequency
    (MHz)
    Sync
    Polarity
    (H / V)
    1366 x 768 1920 x 1080
    IBM 720 x 400 31.469 70.087 28.322 -/+
    c c
    MAC
    640 x 480 35 66.667 30.24 -/-
    c c
    832 x 624 49.726 74.551 57.284 -/-
    c c
    1152 x 870 68.681 75.062 100 -/-
    c
    VESA DMT
    640 x 480 31.469 59.94 25.175 -/-
    c c
    640 x 480 37.861 72.809 31.5 -/-
    c c
    640 x 480 37.5 75 31.5 -/-
    c c
    800 x 600 37.879 60.317 40 +/+
    c c
    800 x 600 48.077 72.188 50 +/+
    c c
    800 x 600 46.875 75 49.5 +/+
    c c
    1024 x 768 48.363 60.004 65 -/-
    c c
    1024 x 768 56.476 70.069 75 -/-
    c c
    1024 x 768 60.023 75.029 78.75 +/+
    c c
    1152 x 864 67.5 75 108 +/+
    c
    1280 x 720 45 60 74.25 +/+
    c c
    1280 x 800 49.702 59.81 83.5 -/+
    c
    1280 x 1024 63.981 60.02 108 +/+
    c
    1280 x 1024 79.976 75.025 135 +/+
    c
    1366 x 768 47.712 59.79 85.5 +/+
    c c
    1440 x 900 55.935 59.887 106.5 -/+
    c
    1600 x 900RB 60 60 108 +/+
    c
    1680 x 1050 65.29 59.954 146.25 -/+
    c
    1920 x 1080 67.5 60 148.5 +/+
    c
    Installing batteries (Battery size: AAA)
    NOTE
    • Use the remote control within 23 feet from TV.
    • Bright light may affect the performance of the remote control.
    Avoid use when nearby fluorescent lights or neon signs.
    • The Color and shape may vary depending on the model.
    Press to select additional channels (digital) being
    broadcasted by the same station. For example, to
    select channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.
    Returns to the previous channel.
    Press to directly access to channels.
    Turns the TV on and off.
    Displays and selects the available video
    sources.
    Use these buttons in a specific feature.
    P.SIZE: Lets you choose the picture size.
    MTS: Press to choose stereo, mono or Separate Audio
    Program (SAP broadcast).
    CC: Controls the caption decoder.
    Cuts off the sound temporarily.
    Automatically shuts off the TV at a preset time.
    Displays the channel list on the screen.
    Displays information on the TV screen.
    Quickly select frequently used functions.
    Selects the on-screen menu items and changes the
    values seen on the menu.
    Exit the menu.
    Returns to the previous menu.
    Turns the remote control light on or off. When
    on, the buttons become illuminated for a
    moment when pressed. (Using the remote
    control with this button set to On will reduce the
    battery usage time.)
    Use these buttons according to the direction
    on screen.
    Changes channels.
    Displays the main on-screen menu.
    Views the Media Play.
    Adjusts the volume.
    MEDIA.P SLEEP
    y The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
    apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
    - Do not cover the slots and openings with a cloth or other materials.
    - Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
    - Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
    y Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
    y Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
    y Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near
    a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
    y Make sure to pull out the power cord from the outlet before cleaning.
    y This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect
    the environment. Please contact your local authorities for disposal or recycling information.
    y Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.
    y Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
    particular attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.
    y To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet
    and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
    y Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local
    electrical supply. (depending on the model)
    y Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
    y To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
    y Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do
    not touch the power cord with wet hands.
    y If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
    contact an authorized dealer or service center.
    y Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time
    (especially when children, elderly or disabled people will be left alone in the house).
    - Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat,
    or cause the insulation to deteriorate.
    y Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,
    chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious
    damage to your set.
    y Use only a properly grounded plug and receptacle.
    - An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
    y
    To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily
    accessible at all times.
    y
    Do not allow children to hang onto the product.
    y
    Store the accessories (batteries, etc.) in a location safely out of the reach of children.
    y
    Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
    y
    Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
    y
    To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped in a small amount of water.
    Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the
    appearance or erase the printing on the product.
    y
    Do not expose the apparatus to dripping or splashing.
    y
    Do not dispose of batteries in a fire.
    y
    Do not short circuit, disassemble, or overheat the batteries.
    y
    There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.
    y
    WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL
    TIMES.
    Warning! Important Safety Instructions
    Please read the safety instructions below before installing and using the product.
    CAUTION
    CAUTION: TO REDUCE THE RISK OF ELECTRIC
    SHOCK, DO NOT REMOVE COVER (OR BACK). THERE
    ARE NO USER SERVICEABLE PARTS INSIDE. REFER
    ALL SERVICING TO QUALIFIED PERSONNEL.
    RISK OF ELECTRIC SHOCK. DO NOT OPEN.
    This symbol indicates that high voltage is
    present inside. It is dangerous to make any kind
    of contact with any internal part of this product.
    This symbol indicates that important literature
    concerning operation and maintenance has
    been included with this product.
    Power Input
    (for 28", 29" models)
    Figures and illustrations in this User Manual are provided for reference only and
    may differ from actual product appearance. Product design and specifications
    may be changed without notice.
    Important Warranty Information Regarding
    Television Format Viewing
    Wide screen format LED Displays with aspect ratios of 16:9 (the ratio of the
    screen width to screen height) are primarily designed to display wide screen
    format full-motion video. The images displayed on them should primarily be in
    the wide screen 16:9 ratio format, or expanded to fill the screen if your model
    offers this feature and the images are constantly moving. Displaying stationary
    graphics and images on screen, such as the dark sidebars on non- expanded
    standard format television video and programming, should be limited to no
    more than 5% of the total television viewing per week. Additionally, viewing
    other stationary images and text such as stock market crawls, video game
    displays, station logos, web sites or computer graphics and patterns, should
    be limited as described above for all televisions. Displaying stationary images
    that exceed the above guidelines can cause uneven aging of LED Displays
    that leave subtle, but permanent burned-in ghost images in the LED picture.
    To avoid this, vary the programming and images, and primarily display full
    screen moving images, not stationary patterns or dark bars. On LED models
    that offer picture sizing features, use these controls to view different formats
    as a full screen picture. Be careful in the selection and duration of television
    formats you use for viewing. Uneven LED aging as a result of format selection
    and use, as well as burned-in images, are not covered by your Samsung
    limited warranty.
    y SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY
    STATEMENT
    Subject to the requirements, conditions, exclusions and limitations of the original
    Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the
    requirements, conditions, exclusions and limitations contained herein, SAMSUNG
    will additionally provide Warranty Repair Service in the United States on SAMSUNG
    products purchased in Canada, and in Canada on SAMSUNG products purchased
    in the United States, for the warranty period originally specified, and to the Original
    Purchaser only.
    The above described warranty repairs must be performed by a SAMSUNG Authorized
    Service Center. Along with this Statement and the Original Limited Warranty
    Statement, a dated Bill of Sale as Proof of Purchase must be presented to the Service
    Center. Transportation to and from the Service Center is the responsibility of the
    purchaser. Conditions covered are limited only to manufacturing defects in material or
    workmanship, and only those encountered in normal use of the product. Exclusions
    include, but are not limited to, any originally specified provisions for in-home or
    on-site services, minimum or maximum repair times, exchanges or replacements,
    accessories, options, upgrades, or consumables.
    For the location of a SAMSUNG Authorized Service Center, please call toll-free:
    – In the United States : 1-800-SAMSUNG (1-800-726-7864)
    – In Canada : 1-800-SAMSUNG
    Still image warning
    Avoid displaying still images (such as jpeg picture files) or still image elements (such
    as TV channel logos, panorama or 4:3 image format, stock or news bars at screen
    bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of
    LED screen, which will affect image quality. To reduce risk of this effect, please follow
    below recommendations:
    y Avoid displaying the same TV channel for long periods.
    y Always try to display any image on full screen, use TV set picture format menu for
    best possible match.
    y Reduce brightness and contrast values to minimum required to achieve desired
    picture quality, exceeded values may speed up the burnout process.
    y Frequently use all TV features designed to reduce image retention and screen
    burnout, refer to proper user manual section for details.
    Securing the Installation Space
    Keep the required distances between the product and other objects (e.g. walls) to
    ensure proper ventilation.
    Failing to do so may result in fire or a problem with the product due to an increase in
    the internal temperature of the product.
    When using a stand or wall-mount, use parts provided by Samsung Electronics
    only.
    • If you use parts provided by another manufacturer, it may result in a problem
    with the product or an injury due to the product falling.
    The appearance may differ depending on the product.
    Be careful when you contact the TV because some parts can be somewhat hot.
    Installation with a stand. Installation with a wall-mount.
    4inches
    4inches
    4inches
    4inches
    4inches
    4inches
    4inches
    BN68-04797F
    BN68-04797F-03
    Contact SAMSUNG WORLDWIDE
    If you have any questions or comments relating to Samsung products, please
    contact the SAMSUNG customer care center.
    Country CANADA U.S.A
    Address
    Samsung Electronics
    Canada Inc., Customer
    Service 55 Standish Court
    Mississauga, Ontario L5R
    4B2 Canada
    Samsung Electronics
    America, Inc. 85
    Challenger Road
    Ridgefield Park, NJ 07660
    Customer Care
    Center
    1-800-SAMSUNG (726-7864)
    Web Site
    www.samsung.com/ca
    (English)
    www.samsung.com/ca_fr
    (French)
    www.samsung.com/us
    y Remote Control (AA59-00600A) & Batteries (AAA x 2)
    y Warranty Card / Regulatory Guide
    y Owner’s Instructions
    y Power Cord
    y AC/DC Adapter (for 19", 22" models)
    y Cable Manager (for 28", 29" models)
    - 2 -- 1 -
    - 6 -- 5 -
    - 3 -
    - 7 -
    - 4 -
    - 8 -
    [UF4000_5000_19-29-ZC]BN68-04797F-03ENG.indd 1 2013-11-04 오전 9:41:15
UN19F4000AF Samsung

Apakah Anda memiliki pertanyaan tentang UN19F4000AF Samsung?

Jumlah pertanyaan: 0

Ajukan pertanyaan anda mengenai Samsung UN19F4000AF di sini kepada pemilik produk lainnya. Sampaikan dekripsi yang jelas dan singkat tentang masalah dan pertanyaan anda. Semakin jelas penjelasan masalahnya, semakin mudah bagi pemilik Samsung UN19F4000AF lainnya untuk menyediakan jawaban terbaik.

Tampilkan panduan gratisSamsung UN19F4000AF di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Samsung UN19F4000AF lainnya. Ajukan pertanyaan Anda di sini

spesifikasi produk

Umum
Brand Samsung
Model UN19F4000AF
Produk TV LED
EAN 132017729107, 151479772421, 887276020136, 887276020228
Bahasa Inggris
Jenis berkas PDF
Layar
Diagonal layar 18.5
Tipe HD -
Resolusi layar 1366 x 768
Resolusi grafis yang didukung 1366 х 768
Modus video yang didukung 720p
Tipe lampu latar LED -
Teknologi interpolasi gerakan Motion Rate 60
Fitur lainnya
Kompabilitas 3D
Pengeras suara terpasang
Baterai disertakan
Tuner tv
Tipe tuner Analog & Digital
Sistem format sinyal analog -
Sistem format sinyal digital ATSC
Audio
Jumlah pengeras suara 2
Tingkat daya RMS 6W
Subwoofer terpasang
Sistem audio DTS Studio Sound
Pengatur tingkat volume otomatis
Port & antarmuka
Jumlah port HDMI 2
Komputer masuk (D-Sub) -
Soket DVI -
Jumlah soket DVI-D 0
Jumlah soket USB 2.0 1
Kuantitas port Tipe A USB 3.2 Gen 1 (3.1 Gen 1) 0
Komponen video (YPbPr/ YCbCr) masuk 1
Jalur komposit video masuk 1
Jumlah port RF 1
Soket LAN ethernet (RJ-45) 0
Antarmuka umum (Common interface - CI) -
Antarmuka umum Plus (CI+) -
Jumlah soket masuk S-Video 0
Suara dari Headphone 1
Pembaca kartu terintegrasi
Jaringan
Ethernet LAN
Wi-Fi
Bluetooth
TV Pintar
TV internet
Fitur pengelolaan
Panduan program elektronik (EPG) -
Tampilan menu (OSD)
Jumlah bahasa menu layar (OSD) 3
Bahasa tampilan menu (OSD) ENG, ESP, FRE
Pewaktu hidup/mati
Mematikan daya secara otomatis
Performa
Fungsi teletext -
Peredupan lokal -
Teknologi pemrosesan gambar Samsung Wide Color Enhancer
Modus permainan
Desain
Pemasangan VESA
Antarmuka dudukan VESA 75 x 75mm
Warna produk Hitam
Tombol on/off -
Daya
Konsumsi daya (maks) 35W
Konsumsi daya (siaga) 0.3W
Konsumsi daya (rata-rata) 15W
Konsumsi listrik tahunan -kWj
Kelas efisiensi energi -
Tegangan masukan AC 110 - 120V
Frekuensi masukan AC 60Hz
Sertifikat
Bersertifikat Energy Star
Digital Living Network Alliance (DLNA) certified
Sertifikasi ENERGY STAR 6.0
Berat dan dimensi
Panjang 454.65mm
Lebar 48.26mm
Tinggi 281.94mm
Berat 2495g
Panjang (dengan penyangga) 454.65mm
Lebar (dengan penyangga) 124.46mm
Tinggi (dengan penyangga) 314.96mm
Berat dengan penyangga 2586g
Data pemaketan
Panjang kemasan 520.69mm
Lebar kemasan 142.23mm
Tinggi kemasan 340.36mm
Berat kemasan 3720g
Remote kontrol genggam
Kabel disertakan AC
Panduan

petunjuk.co.id

Mencari panduan? petunjuk.co.id menjamin anda untuk menemukan panduan yang anda cari dalam waktu singkat. Database kami memuat lebih dari 1 juta panduan PDF untuk lebih dari 10,000 merek. Setiap hari kami menambahkan panduan terbaru sehingga anda akan selalu menemukan produk yang anda cari. Sangat mudah: hanya dengan mengetikkan nama merek dan tipe produk dalam kotak penelusuran dan anda akan melihat secara instan panduan yang anda pilih secara online dengan gratis.

petunjuk.co.id

© Hak Cipta 2020 petunjuk.co.id. Hak Cipta Dilindungi.