Petunjuk ZoneFlex 7982 Ruckus Wireless

ZoneFlex 7982 Ruckus Wireless
7.5 · 1
PDF petunjuk
 · 4 halaman
petunjukRuckus Wireless ZoneFlex 7982
Copyright © 2012 Ruckus Wireless, Inc.
Published September 2012, Part Number 800-70362-001 Rev E

ZoneFlex 7982 Dual Band

802.11n Multimedia Wi-Fi

Access Point

Quick Setup Guide

This Quick Setup Guide provides step-by-step instructions
on how to set up your Ruckus Wireless ZoneFlex Access
Point. After completing the steps described in this Guide,
you will be able to place the Access Point (AP) at your site
and provide wireless network access to users.
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
User Guides and Release Notes are available at
Software Upgrades are available at
Open Source information is available at
Software License and Limited Warranty are available at


ZoneFlex 7982 Access Point
Mounting screws and anchors (2)
T-Bar clips and alignment spacer
Security screw
Regulatory flyer
•This Quick Setup Guide


A computer running Windows 7 (procedures for other OS’s
are similar)
One or more of the following:
A modem (DSL or cable), broadband router, or other
device provided by your Internet Service Provider
that brings Internet access to your site.
A network switch or a DSL/Internet gateway device.
Two Cat 5e Ethernet cables
An AC power adapter (sold separately), or
An 802.3af or 802.3at -compliant Power over Ethernet (PoE)
switch or PoE injector
1 After removing your Ruckus Wireless AP from its pack-
age, place it next to your computer.
2 Using an Ethernet cable, connect your computer’s net-
work port to one of the two ports on the AP.
3 Using an AC adapter (sold separately), connect the AP to
a convenient (and protected) power source.
Alternatively, connect the 10/100/1000 POE port to a
PoE injector or switch for both power and network
4 Verify that the Power LED on the external enclosure is a
steady green.
1 On your Windows 7 computer, configure your network
adapter from the Local Area Connection settings as fol-
Start > Control Panel > Network and Sharing Cen-
ter > Change Adapter Settings
2 Edit the TCP/IPv4 address settings as follows:
Local Area Connection > Properties > Internet
Protocol Version 4 (TCP/IPv4) > Properties
The TCP/IPv4 Properties dialog box appears.
3 Select Use the following IP address (if it is not already
selected) and then make the following entries:
IP address: (or any address in the
192.168.0.x network)
Subnet mask:
Default gateway:
Leave the DNS server fields empty.
4 Click OK to save your changes.
Your changes are put into effect immediately.
As specified earlier, the AP should be directly connected to
your computer (through one of the Ethernet ports) and
powered on, ready for setup.
1 On your computer, open a Web browser window.
2 In the browser, type this URL to connect to the AP:

3 Press <Enter> to initiate the connection. When a security
alert dialog box appears, click OK/Yes to proceed.
4 When the Ruckus Wireless Admin login page appears,
enter the following:
Username: super
Password: sp-admin
5 Click Login.
If the AP is deployed with a ZoneDirector, follow the
ZoneDirector Quick Setup Guide and connect the AP to
your local network.
PoE In
DC input
The following procedures assume Windows 7 as the oper-
ating system. Procedures for other OS’s are similar.
Write down all of the currently active settings so you can
restore your computer to its current configuration later
(when this process is complete).


Tampilkan panduan gratisRuckus Wireless ZoneFlex 7982 di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Ruckus Wireless ZoneFlex 7982 lainnya. Ajukan pertanyaan Anda di sini

Apakah Anda memiliki pertanyaan tentang ZoneFlex 7982 Ruckus Wireless?

Apakah Anda memiliki pertanyaan tentang Ruckus Wireless ZoneFlex 7982 dan jawabannya tidak ada di manual? Ajukan pertanyaan Anda di sini. Berikan deskripsi yang jelas dan komprehensif tentang masalah dan pertanyaan Anda. Makin jelas masalah dan pertanyaan Anda, makin mudah bagi pemilik Ruckus Wireless ZoneFlex 7982 lainnya untuk menyediakan jawaban yang terbaik.

Jumlah pertanyaan: 0

spesifikasi produk

Di bawah ini, Anda akan menemukan spesifikasi produk dan spesifikasi manual dari Ruckus Wireless ZoneFlex 7982.

Brand Ruckus Wireless
Model ZoneFlex 7982 | 901-7982-US00
Produk Access Point
EAN 5054991127265
Bahasa Inggris
Jenis berkas Panduan pengguna (PDF)
Kecepatan transfer data maks 1000 Mbit/d
Kecepatan data LAN ethernet 10,100,1000 Mbit/d
Kecepatan data Wi-Fi (maks) 450 Mbit/d
Pita frekuensi 2.4 - 5 GHz
Jumlah pengguna 500 pengguna
Modulasi -
Jumlah kanal 11 saluran
Standar jaringan IEEE 802.11a,IEEE 802.11b,IEEE 802.11e,IEEE 802.11g,IEEE 802.11i,IEEE 802.11n,IEEE 802.1Q,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u
2,4GHz Ya
5 GHz Ya
Protokol pengelolaan SNMP v1, 2, 3
Protokol jaringan yang didukung IPv4, IPv6, L2TP, PPPoE, HTTP/S, Telnet/SSH, FTP, TFTP
Port & antarmuka
DC-in jack Ya
Soket LAN ethernet (RJ-45) 2
Algoritme keamanan 802.1x RADIUS,WEP,WPA-PSK,WPA-TKIP,WPA2-AES
Tingkat gain antena (maks) 3 dBi
Jumlah antena 2
Fitur antena Antena terintegrasi
Konsumsi daya (rata-rata) 7 W
Tegangan masukan AC 12 V
Arus masuk 1.5 A
Dukungan Power over Ethernet (PoE) Ya
Internal Tidak
Slot kunci kabel Ya
Warna produk Putih
Tipe slot kunci Kabel Kensington
Operational conditions
Rentang kelembapan pengoperasian (H-H) 0 - 95 persen
Suhu pengoperasian (T-T) 0 - 50 °C
Berat dan dimensi
Panjang 203 mm
Lebar 203 mm
Tinggi 50 mm
Berat 1000 g
Tampilkan lebih banyak

Pertanyaan yang Sering Ditanyakan

Tidak dapat menemukan jawaban atas pertanyaan Anda di manual? Anda dapat menemukan jawaban atas pertanyaan Anda di FAQ tentang Ruckus Wireless ZoneFlex 7982 di bawah ini.

Apakah pertanyaan Anda tidak terdaftar? Ajukan pertanyaan Anda di sini

Tidak ada hasil