Petunjuk HLG-320H-48A Mean Well

HLG-320H-48A Mean Well
7.5 · 1
PDF petunjuk
 · 7 halaman
Inggris
petunjukMean Well HLG-320H-48A
Installation Manual
TypeLED Power Supply
FamiliesAP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD,
PLC, PLD, PLM, PLN, PLP, PWM, ULP

Introduction

The LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an
adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of
them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.
Mean Well’s LED power supplies include metal case, plastic case, and PCB types.

Installation

1Before commencing any installation or maintenance work, please disconnect the power supply from the utility.
Ensure that it cannot be re-connected inadvertently!
2Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
3Mounting orientations other than standard orientation or operate under high ambient temperature may
increase the internal component temperature and will require a de-rating in output current. Please refer to
the specification sheet to receive the optimum mounting position and information about the de-rating curve.
4Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit.
Please refer to its specification.
5For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighting
fixture is tight so that water cannot intrude into the system.
6For dimmable LED power supplies, make sure that your dimming controller is capable of driving
these units. For ELN series, either “D” or “Ptype, require 40mA each unit; for those with “3 in 1” dimming
function, e.g. HLG and LPF series, require 0.15mA each unit.
7Wiring: The wire color will vary by country, please refer to the table below.
North America
European Harmonized
Live and ACL
Black
Brown
Neutral and ACN
white
Blue
PE and FG (Class I only)
Green
Green/yellow
aConnect the FG wire (green or green/yellow) of the LED power supply to PE (green or green/yellow), this
step can be skipped when the unit is marked class II, ungrounded.
bConnect the ACL wire (black or brown) of the LED power supply to Live (black or brown).
cConnect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).

Petunjuk

Tampilkan panduan gratisMean Well HLG-320H-48A di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Mean Well HLG-320H-48A lainnya. Ajukan pertanyaan Anda di sini

Apakah Anda memiliki pertanyaan tentang HLG-320H-48A Mean Well?

Apakah Anda memiliki pertanyaan tentang Mean Well HLG-320H-48A dan jawabannya tidak ada di manual? Ajukan pertanyaan Anda di sini. Berikan deskripsi yang jelas dan komprehensif tentang masalah dan pertanyaan Anda. Makin jelas masalah dan pertanyaan Anda, makin mudah bagi pemilik Mean Well HLG-320H-48A lainnya untuk menyediakan jawaban yang terbaik.

Jumlah pertanyaan: 0

spesifikasi produk

Di bawah ini, Anda akan menemukan spesifikasi produk dan spesifikasi manual dari Mean Well HLG-320H-48A.

Umum
Brand Mean Well
Model HLG-320H-48A
Produk Tidak ada dalam kategori
Bahasa Inggris
Jenis berkas Panduan pengguna (PDF)
Berat dan dimensi
Berat 1880 g
Tinggi 43.8 mm
Panjang 90 mm
Lebar 252 mm
Daya
Tegangan keluar 48 V
Tegangan masukan AC 90 - 305 V
Fitur
Daya keluaran 320 W
International Protection (IP) code IP20
Detail teknis
Sertifikat keberlanjutan RoHS
Tampilkan lebih banyak

Pertanyaan yang Sering Ditanyakan

Tidak dapat menemukan jawaban atas pertanyaan Anda di manual? Anda dapat menemukan jawaban atas pertanyaan Anda di FAQ tentang Mean Well HLG-320H-48A di bawah ini.

Apakah pertanyaan Anda tidak terdaftar? Ajukan pertanyaan Anda di sini

Tidak ada hasil