Name: FeiYu-Tech G4 Plus
Brand: FeiYu-Tech
SKU: 1030087
Rating: 85 (1 reviews)

petunjukFeiYu-Tech G4 Plus

Function Button Operation Instructions

Remove the power

switch cap, insert two

batteries into the handle.

Insert The Batteries

Install the Smart phone

by the quick-release

adapter. And make

sure it is fixed well.

Install The Smartphone

Indicator

Tilting Axis

Panning Axis

Power Switch

Rolling Axis

Function Button

Use for switching working modes.

Function Button

Identify the working mode

via switch to different status

of the indicator light.

Upgrade........

Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest

firmware then unzip the RAR file.Remove the batteries and refer to the connection diagram to connect the gimbal with the computer.

Please refer to the manual of update operation to upgrading,otherwise the Gimbal will be abnormal.

The Gimbal attitude can be calibrate through parameter setting software. User can adjust the pitch and roll in a small angle to achieve more

accuracy filming scene. Please insert the batteries then refer to the connection diagram to connect the gimbal with the computer for caliration.

Firmware Upgrade Instruction

Gimbal Calibration

Function Interface

USB Cable USB Connector

Attention : Please be sure to connect the computer with the USB connector.

Attention: Be sure to connect the computer with the USB connector

When the red LED indicator light flashes

in use, it means the gimbal is out-of-order

Indicator Explanation

LED Status

Explain

Blue light flashes

three times

Full Power

Blue light flashes

twice

Enough Power

Blue light flashes

once

Low Power

Blue light keeps

flashing

No Power

Product Overview

Operating

Optional Accessories

ChargerRechargeable Battery

Input: DC 5V

Output: DC 4.2V

Type: 18350

Weight: 6 gWeight: 52 g

USB ConnectorHeavyCounter WeightLightCounter Weight

Use Heavy Counter Weight

Use Light Counter Weight

Version 1.0

G4 Plus 3-Axis Handheld Gimbal for Smartphone

Firmware Upgrade And Other Settings

Please Remove The Batteries Before Upgrading

User Guide

(1) Please install the suitable smartphone first before power on the gimbal.

(2) Please turn off the power when not in use.

Attention !

G4 Plus compatible with iPhone 6s Plus/ 6s / 6 Plus / 6 / 5s / 5c / 5 / 4s /4

and other smartphones with similar dimensions

Adjust The Center of Gravity

If the smart phone inclines towards

the tilting axis, pull it towards the left

to be in place, and let the center of

gravity keep balance or slightly incline

to the smart phone. If the smart phone

still inclines towards the pitch axis,

install the clump weight.

Standard Installation Method

Tilting

Axis

Power On/Off

Check whether the phone is installed

well, and long press the function

button for two seconds to turn on

the gimbal. Long press the function

button for three seconds to turn off

the gimbal.

Choose The Suitable Counter Weight

If the smartphone still leans to the

tilting axis direction, after adjust

the center of gravity, please replace

the counter weight cover with the

counter weight module. Please refer

to the left showing photo. Try to keep

the center of gravity balance after

mounting the counter weight module.

Tilting

Axis

Function Interface

USB CableBasic Working Modes

Panning Mode

The smart phone is allowed to pan left or right.

Vertical tilts or rolls are restricted.

Panning and

Tilting Mode

The smart phone is allowed to pan left or right

and tilt up and down. Rolls are restricted.

Other Functions

Special Working Condion （Inversion Mode）

Under any working mode, consecutively press the function button for three times, the gimbal

enters into the inversion mode and automatically switches to the Panning mode. Invert the gimbal, put the camera face down, and combine with

the three working modes of handheld gimbal to capture the wonderful moments. The gimbal can restore to the boot-up state by consecutively

pressing the function button for three times under inversion mode.

Manual Pulling Locking

After the gimbal has been powered on for eight seconds, the tilt angle can be adjusted manually in the panning

mode and lock mode. Adjust the tilt angle to the desired position and wait for 0.5 second until the gimbal registers the new angle.

Reset

Consecutively press the function button for four times to restore to the boot-up state.

The smart phone stays in its current orientation.

All panning, tilting and rolls are restricted.

Lock Mode

LED Status

Double tap

Single tap

Single Flashes /

On Constantly

Double Flashes

Function

Panning Mode /

Lock Mode*

Panning and Tilting Mode

Triple tap Single Flashes Inversion Mode

Quadruple tap

Single Flashes

【 Lock Mode 】

Under any working mode, single tap the function button, the indicator LED is always on, the Gimbal can be

enter the 【 Lock Mode 】. During the LOCK MODE other operation is arbitrary.

Operation

Single Flashes

Standby

Long Press For 3 Second

Can switch in other mode, or trip again to exit and reset

Under panning and tilting mode, single tap to switch to lock mode

Single tap to switch between panning mode and lock mode.

Single tap again to activate

Reset the tilting axis of the gimbal to initial orientation and initial mode

Reset

Remark

9 mm

iPhone 5

iPhone 4

0 mm

iPhone 6

iPhone 6s

0 mm

iPhone 6 Plus

Light

Heavy

iPhone 6s / 6 Installation

iPhone 5s / 5C / 5 / 4s / 4

Installation

iPhone 6s Plus / 6 Plus

Installation

* *

Tampilkan panduan gratisFeiYu-Tech G4 Plus di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik FeiYu-Tech G4 Plus lainnya. Ajukan pertanyaan Anda di sini

Apakah Anda memiliki pertanyaan tentang G4 Plus FeiYu-Tech?

Apakah Anda memiliki pertanyaan tentang FeiYu-Tech dan jawabannya tidak ada di manual? Ajukan pertanyaan Anda di sini. Berikan deskripsi yang jelas dan komprehensif tentang masalah dan pertanyaan Anda. Makin jelas masalah dan pertanyaan Anda, makin mudah bagi pemilik FeiYu-Tech lainnya untuk menyediakan jawaban yang terbaik.

Jumlah pertanyaan: 0

Umum

	FeiYu-Tech
	G4 Plus \| FY-G4-PLUS
	tidak ada dalam kategori
	Inggris
	Panduan pengguna (PDF)

Fitur

Tipe	Stabilizer kamera tangan
Bahan	-
Warna produk	Black, Bronze
Memutar	Ya
Produk yang kompatibel	iPhone6/5C/5S/5/4S/4

Berat dan dimensi

Panjang	38 mm
Lebar	93 mm
Tinggi	250 mm
Berat	290 g

Tampilkan lebih banyak

Tidak dapat menemukan jawaban atas pertanyaan Anda di manual? Anda dapat menemukan jawaban atas pertanyaan Anda di FAQ tentang FeiYu-Tech G4 Plus di bawah ini.