VCM44E Chief

Petunjuk VCM44E Chief

(1)
  • INSTALLATION INSTRUCTIONS
    Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
    makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
    or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
    pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
    document.
    Chief Manufacturing, a products division of Milestone AV Technologies
    8401 Eagle Creek Parkway, Savage, MN 55378
    • P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
    8803-002022 Rev00
    ©2011 Milestone AV Technologies,
    a Duchossois Group Company
    01/11
    Continued. . .
    MODEL: HB-44E Custom Projector Bracket
    Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
    PARTS
    Figure 1
    INSTALLATION
    WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
    to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
    1. Lower custom HB bracket onto top of projector. Ensure that triangle in bracket points toward front of projector. (See Figure 1)
    2. Attach HB bracket to projector using four M10 x 35mm hex head screws through four M10 washers and four outer corner holes in the HB
    bracket. (See Figure 1)
    3. Continue attaching bracket to projector using two M8 x 25mm hex head screws through two M8 washers into two outer center holes in
    bracket. (See Figure 1)
    4. Finish attaching bracket to projector using two M8 x 70mm hex head screws through four nylon spacers (2 spacers per hex head screw)
    and two M8 washers into two center holes in bracket. (See Figure 1)
    (1) BRACKET, Custom HB (4) SCREW, Hex head cap screw, M10 x 35mm
    (4) NUT, Flange, Hex, 5/16-18 (2) SCREW, Hex head cap screw, M8 x 25mm
    (4) WASHER, Flat, M10 (2) SCREW, Hex head cap screw, M8 x 70mm
    (4) WASHER, Flat, M8 (4) SPACER, Nylon, .74 x .391 x 1.0"
    1
    4
    x 2
    3
    x 2
    2
    x 2
    2
    x 2
VCM44E Chief

Apakah Anda memiliki pertanyaan tentang VCM44E Chief?

Jumlah pertanyaan: 0

Ajukan pertanyaan anda mengenai Chief VCM44E di sini kepada pemilik produk lainnya. Sampaikan dekripsi yang jelas dan singkat tentang masalah dan pertanyaan anda. Semakin jelas penjelasan masalahnya, semakin mudah bagi pemilik Chief VCM44E lainnya untuk menyediakan jawaban terbaik.

Tampilkan panduan gratisChief VCM44E di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Chief VCM44E lainnya. Ajukan pertanyaan Anda di sini

spesifikasi produk

Umum
Brand Chief
Model VCM44E
Produk Penyangga panel datar
EAN 841872027258
Bahasa Inggris
Jenis berkas PDF
Performa
Jenis dudukan ceiling
Berat maksimal (kapasitas) -kg
Warna produk Hitam

petunjuk.co.id

Mencari panduan? petunjuk.co.id menjamin anda untuk menemukan panduan yang anda cari dalam waktu singkat. Database kami memuat lebih dari 1 juta panduan PDF untuk lebih dari 10,000 merek. Setiap hari kami menambahkan panduan terbaru sehingga anda akan selalu menemukan produk yang anda cari. Sangat mudah: hanya dengan mengetikkan nama merek dan tipe produk dalam kotak penelusuran dan anda akan melihat secara instan panduan yang anda pilih secara online dengan gratis.

petunjuk.co.id

© Hak Cipta 2020 petunjuk.co.id. Hak Cipta Dilindungi.