SLB302 Chief

Petunjuk SLB302 Chief

(1)
  • 8800-002200 Rev00
    ©2012 Milestone AV Technologies,
    a Duchossois Group Company
    06/12
    Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
    no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
    of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
    implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
    Chief Manufacturing, a products division of Milestone AV Technologies
    6436 City West Parkway, Eden Prairie, MN 55344
    • P: 800.582.6480 / 952.225.6000 • F:877.894.6918 / 952.894.6918
    INSTALLATION INSTRUCTIONS
    SSB-302, SSM-302, SLB-302 and SLM-302 Interface Brackets
    SSB-302, SSM-302, SLB-302 and SLM-302 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific
    installation instructions provided with the mount for additional installation information.
    Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
    WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
    DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
    Installation Instructions
    WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
    DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.
    NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
    1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
    2. Turn projector upside down on a flat surface.
    3. Place the interface bracket onto the bottom of the projector, aligning the mounting holes in the bracket with the threaded inserts in the
    bottom of the projector and ensuring that triangle in bracket points towards front of projector.
    4. Position M6 x 12mm mounting screws with M6 flat washers into the threaded inserts and bracket side tabs. Tighten all fasteners at this
    time, securing the bracket to the projector.
    NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the
    All-Points Security Kit.
    Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
    (1) Interface Bracket (5) Screw, Phillips Pan Head, Machine, M6 x 12mm
    (4) 10-24 Thumb Nuts ** (5) Washer, M6
    (1) All-Points Security Kit (1) 5/32" Security Hex Key
    **Only used when installing SLB/SSB interface brackets.
    NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above.
    DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.
    Note: SSB-style interface bracket connections are circled. Note: SSM-style interface bracket connections are circled.
    SLB-302
    SLM-302
    Towards front
    of projector
    Towards front
    of projector
SLB302 Chief

Apakah Anda memiliki pertanyaan tentang SLB302 Chief?

Jumlah pertanyaan: 0

Ajukan pertanyaan anda mengenai Chief SLB302 di sini kepada pemilik produk lainnya. Sampaikan dekripsi yang jelas dan singkat tentang masalah dan pertanyaan anda. Semakin jelas penjelasan masalahnya, semakin mudah bagi pemilik Chief SLB302 lainnya untuk menyediakan jawaban terbaik.

Tampilkan panduan gratisChief SLB302 di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Chief SLB302 lainnya. Ajukan pertanyaan Anda di sini

spesifikasi produk

Umum
Brand Chief
Model SLB302
Produk Penyangga panel datar
EAN 841872155692
Bahasa Inggris
Jenis berkas PDF
Performa
Jenis dudukan ceiling
Berat maksimal (kapasitas) -kg
Warna produk Hitam
Lengan dapat disesuaikan

petunjuk.co.id

Mencari panduan? petunjuk.co.id menjamin anda untuk menemukan panduan yang anda cari dalam waktu singkat. Database kami memuat lebih dari 1 juta panduan PDF untuk lebih dari 10,000 merek. Setiap hari kami menambahkan panduan terbaru sehingga anda akan selalu menemukan produk yang anda cari. Sangat mudah: hanya dengan mengetikkan nama merek dan tipe produk dalam kotak penelusuran dan anda akan melihat secara instan panduan yang anda pilih secara online dengan gratis.

petunjuk.co.id

© Hak Cipta 2020 petunjuk.co.id. Hak Cipta Dilindungi.