PAS400B-5V Casio

Petunjuk PAS400B-5V Casio

(1)
  • Operation Guide 2632/2805
    1
    MA0311-EB
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to carefully read this manual and keep it on hand for later reference
    when necessary.
    Important!
    The fishing/hunting time data, sunrise and sunset data, and moon phase indicator
    produced by this watch are all based on calculations that use the watch’s current time,
    date, and Home Site settings. Because of this, you should make sure that the current
    date and time, and your Home Site data are all correct before using such data.
    When fishing or hunting, always take proper precautions to ensure your own
    personal safety and the personal safety of others around you.
    Note that the fishing/hunting time data, sunrise and sunset data, and moon phase
    indicator are all based on calculated values. They are provided only for reference
    purposes.
    See the “Timekeeping” section of this manual for information about setting the
    current time and date, and about specifying your Home Site.
    General Guide
    Press D to change from mode to mode.
    In any mode, press L to illuminate the display.
    About This Manual
    The operational procedures for Modules 2632 and 2805
    are identical. All of the illustrations in this manual show
    Module 2632.
    Button operations are indicated using the letters shown
    in the illustration.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    Module 2805
    (Light)
    Module 2632
    In addition to the modes shown here, this watch also has a Time Memo feature.
    Timekeeping
    Use the Timekeeping Mode to set and view the current
    time, date, and your Home Site.
    The Moon phase indicator shows the current Moon
    phase in accordance with the current date as kept in the
    Timekeeping Mode.
    The graphic area that runs around the periphery of the
    display indicates fishing/hunting times, as well as
    daylight and nighttime hours.
    Important!
    Be sure to correctly configure the current time and date,
    and your Home Site data (data for the site where you use
    the watch) before using the functions of this watch.
    See “Home Site Data” about specifying your Home Site.
    Recall Mode Alarm Mode Stopwatch Mode
    Timekeeping Mode Fishing/Hunting
    Time Mode
    Sunrise/Sunset Mode
    Press
    D.
    Day of week
    Year Month – Day
    Hour : Minutes Seconds
    PM indicator
    Graphic area
    Moon phase indicator
    To set the time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    While the seconds are flashing, press E to reset the
    seconds count to
    00
    .
    2. Press D to move the flashing in the sequence shown
    below to select other settings.
    Seconds Hour
    Minutes
    12/24-Hour
    Format
    Day Year
    Month
    3. While the hour, minutes, year, month, or day setting is flashing, use E (+) and B
    (–) to change it.
    When the 12/24-hour setting is flashing, press E to toggle between 12-hour
    (
    ) and 24-hour ( ) timekeeping.
    4. Press A twice to exit the setting screen.
    The first press of A displays the Home Site GMT differential setting screen.
    Pressing A again exits the setting screen.
    When you exit the setting screen after changing the current time and/or date setting,
    the graphic area around the periphery of the display performs an animated pattern
    to indicate that the watch is performing internal calculations. This process can
    continue for as long as 15 seconds. Wait until the animated pattern stops before
    performing any other button operation.
    The day of the week is automatically displayed in accordance with the date (year,
    month, and day) settings.
    Home Site Data
    Moon phase indicator, fishing/hunting time data, and sunrise and sunset data will not
    be displayed properly unless Home Site data (GMT differential, latitude, and
    longitude) is configured correctly.
    The GMT differential is a value that indicates the time difference between Greenwich
    Mean Time and the time zone where a city is located.
    Note that you must add one hour to the current time setting and the GMT differential
    of your time zone whenever you change to Daylight Saving Time (summer time).
    Subtract one hour when you change back to Standard Time.
    The “Site Data List” provides GMT differential, latitude, and longitude information
    around the world.
    To configure Home Site data
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press A again to display the GMT differential setting
    screen.
    3. Use E (+) and B (–) to change it.
    You can specify a value in the range of –11.0 to
    +14.0, in 0.5-hour units.
    4. Press D to display the Latitude/Longitude setting
    screen, and then change the setting.
    Press B to change the latitude value and E to
    change the longitude.
    At first, pressing B or E increases the value. Press
    C to toggle the B and E button operations
    between increase and decrease.
    You can specify latitude in the range of 65°N to 65°S,
    and longitude from 179°W to 180°E, both in 1-degree
    units.
    5. Press A to exit the setting screen.
    When you exit the setting screen after changing the latitude and/or longitude setting,
    the graphic area around the periphery of the display performs an animated pattern
    to indicate that the watch is performing internal calculations. This process can
    continue for as long as 15 seconds. Wait until the animated pattern stops before
    performing any other button operation.
    Graphic Area
    In the Timekeeping Mode, the graphic area can be used to view either a fishing/
    hunting time graph or a daylight graph. Press E to toggle between them.
    Fishing/Hunting Time Graph Daylight Graph
    Level indicator
    0:00 (12:00 AM)
    18:00
    (6:00 PM)
    6:00 AM
    12:00 (12:00 PM)
    The markings along the display’s graphic area show the 24 hours of each day. Each
    graphic area segment represents 30 minutes. The flashing segment of the graphic
    area indicates the current time.
    The fishing/hunting time graph indicates the times when fish or game can be
    expected to be feeding. For more information, see “Using the Fishing/Hunting Time
    Features”.
    The blackened part of the daylight graph indicates nighttime. For more information,
    see “Sunrise/Sunset Mode”.
    Using the Fishing/Hunting Time Features
    Your watch provides you with information about favorable
    fishing/hunting times and other data (Moon phase and
    age) at your Home Site for a particular date. You can even
    configure a fishing/hunting alarm that alerts you when a
    favorable fishing/hunting time has been reached.
    The fishing/hunting times shown by your watch are the
    times when the moon is at its highest point (upper
    transit), lowest point (lower transit), furthest point the
    east (east transit), and furthest point to the west (west
    transit) of your Home Site. These are favorable times for
    fishing and hunting.
    For more details about the fishing/hunting times, see
    “Fishing/Hunting Time Calculation”.
    See “Moon Phase Indicator” for information about the
    Moon phase indicator.
    Latitude
    Longitude
    Press E.
    Moon age
    Date (Year
    Month Day)
    Time (Hour : Minutes)
    Fishing/hunting time graph
    Moon phase indicator
PAS400B-5V Casio

Apakah Anda memiliki pertanyaan tentang PAS400B-5V Casio?

Jumlah pertanyaan: 0

Ajukan pertanyaan anda mengenai Casio PAS400B-5V di sini kepada pemilik produk lainnya. Sampaikan dekripsi yang jelas dan singkat tentang masalah dan pertanyaan anda. Semakin jelas penjelasan masalahnya, semakin mudah bagi pemilik Casio PAS400B-5V lainnya untuk menyediakan jawaban terbaik.

Tampilkan panduan gratisCasio PAS400B-5V di sini. Anda sudah membaca panduan tetapi tidak menjawab pertanyaan anda? Silakan ajukan pertanyaan anda pada halaman ini kepada pemilik Casio PAS400B-5V lainnya. Ajukan pertanyaan Anda di sini

spesifikasi produk

Umum
Brand Casio
Model PAS400B-5V
Produk Jam Tangan Olahraga
EAN 151903595244, 79767785420
Bahasa Inggris
Jenis berkas PDF
Detail teknis
Tahan air
Pengukur waktu Memancing
Tahan air hingga 100m
Kalender
Modus jam 12j/24j
Stopwatch
Akurasi 15detik/bulan
Fitur lainnya
Dimensi (PxLxT) 50 x 12.5 x 44mm
Berat dan dimensi
Berat 46g
Daya
Jenis baterai CR2025

petunjuk.co.id

Mencari panduan? petunjuk.co.id menjamin anda untuk menemukan panduan yang anda cari dalam waktu singkat. Database kami memuat lebih dari 1 juta panduan PDF untuk lebih dari 10,000 merek. Setiap hari kami menambahkan panduan terbaru sehingga anda akan selalu menemukan produk yang anda cari. Sangat mudah: hanya dengan mengetikkan nama merek dan tipe produk dalam kotak penelusuran dan anda akan melihat secara instan panduan yang anda pilih secara online dengan gratis.

petunjuk.co.id

© Hak Cipta 2020 petunjuk.co.id. Hak Cipta Dilindungi.